3D Printed Names
A name printed in 3D is one of those objects that costs almost nothing to make and gets kept for years — on a nursery door, a desk, a wedding table, a Christmas tree. This page shows what they actually look like at real sizes, what one costs, and the two ways to end up holding one: print it yourself, or have someone print it and post it to you.
What a 3D printed name looks like
All of these came off a consumer FDM printer with no post-processing beyond removing a brim. No resin, no painting, no CNC.
What one costs and how long it takes
Numbers below are for a typical 150 mm wide, 5 mm thick name in PLA on a consumer printer — the size most people actually make.
Material cost
~$0.30
Around 10–15 g of filament. At $20–25 per kilo, the plastic in a name costs less than a stamp.
Print time
45–75 min
At 0.2 mm layers with no supports. A script name sign at 200 mm runs closer to three hours.
Printed by a service
Varies
Print services quote per part based on volume, material and where the printer is. Upload the file to get a real number before committing.
The file
One STL
Watertight, one solid, no repair needed. Free to design and preview here; you pay only to download.
Getting a name printed and shipped to you
You do not need to own a printer to own a 3D printed name. Treatstock takes an STL file, quotes you from a network of independent printers — often one in your own country — and posts the finished object to you. Because the file is generated to be printable rather than sculpted by hand, it goes through their automatic checks without the rejections that sink most hobbyist uploads.
Design the name below, download the STL, upload it to Treatstock, choose a material and colour, and pay. The quote comes back immediately and you can see the printer's location and rating before you commit.
Get it printed at TreatstockTreatstock is an independent company. This is an affiliate link, which means we may earn a commission if you order through it — at no extra cost to you. We do not handle the order, the payment or the shipping, and we cannot resolve problems with it. Check the quote and delivery estimate before you buy.
Or make it yourself, right here
Type a name and it appears in 3D. Change the font, the thickness, the base — the preview updates as you type, and it costs nothing until you download the file.
Which material to ask for
If you are ordering rather than printing, this is the one choice that actually changes the result. If you are printing yourself, it is what to load.
PLA
Default choice
Sharpest detail, widest colour range, cheapest. Softens around 55–60°C, so keep it out of cars and sunny windowsills.
PETG
Outdoors & heat
Holds up to roughly 80°C and shrugs off UV far better. Slightly softer edges on fine script.
Resin (SLA)
Tiny detail
Worth it only for very small names or very fine script where layer lines would show. More expensive and more brittle.
Matte filament
Best for photos
Not a different plastic, just a finish. Hides layer lines on curves and photographs much better than glossy.
Common questions
Can I get a 3D printed name without owning a printer?
Yes. Design the name here, download the STL, and upload it to a print-on-demand service — they print it and ship it. That is what the section above is for.
How much does a 3D printed name cost?
If you print it yourself, about 30 cents of filament plus an hour of machine time. If you order it, the price depends on size, material and the service, so upload the file and get a quote — it is the only honest answer.
What sizes work best?
150 mm wide is the sweet spot for a desk or shelf name. Nursery and wall signs run 200–400 mm. Tags and place cards work down to about 60 mm. Beyond roughly 250 mm you are into splitting the print and joining it.
Will the letters be joined together?
In a script font, yes — the letters connect and the whole name prints as one piece. In a block font they are separate unless you add a base, which joins them to a shared plate.
Is it strong enough to be handled?
At 5 mm thick in PLA, a name survives normal handling, posting and being knocked off a shelf. What breaks them is thin script strokes under 3 mm — add thickness rather than hoping.
Can I sell 3D printed names I make here?
With a subscription, yes — commercial use is included. A single download is for personal use only.
What file format do I get?
A standard STL. Every slicer and every print service accepts it, and it needs no repair before printing.